TYT TH-UV3R programming software
Open WebCHIRPWebCHIRP programs the TYT TH-UV3R in your browser. It runs the CHIRP project's own driver for this radio, so it reads and writes the same codeplug the desktop software does — without installing anything.
No driver install needed
TYT programming cables use a CH340, CP2102, PL2303 or FTDI USB-serial chip. WebCHIRP speaks to all four directly from the browser, so there is no driver package to download and no Windows version to match. Plug the cable in and pick the port when the browser asks.
What you can edit on the TH-UV3R
- 128 memory channels, numbered 1 to 128
- Channel names up to 6 characters
- Modes: FM, NFM
- Bands: 136–520 MHz
- Tone squelch: Cross, DTCS, TSQL, Tone
TH-UV3R hardware
Researched from the sources listed below — spec sheets, manuals and retailer listings — rather than taken from the CHIRP driver. Anything not established is left out.
| Type | Handheld |
|---|---|
| Charging | USB (micro or mini) |
| Transmit power | Up to 2 W |
| Modulation | FM, WFM |
| Display | Yes |
| Still manufactured | No |
| Dual receive | No |
| APRS | No |
| GPS | No |
| Bluetooth programming | No |
Frequency bands
| Band | Receive | Transmit |
|---|---|---|
| FM broadcast | 76–108 MHz | — |
| VHF | 136–174 MHz | 136–174 MHz |
| UHF | 400–470 MHz | 400–470 MHz |
Charges from a mini-USB socket. Ranges are the 2 m/70 cm (136–174/400–470 MHz) version; other band pairs, such as 220/440, were also sold.
Sources: alibaba.com · radioshop888.com
How to program a TYT TH-UV3R
- Plug the programming cable into the radio and the computer.
- Open WebCHIRP, check TYT TH-UV3R is selected, and press Download.
- Edit the channels, or pull in nearby repeaters from a directory.
- Press Upload to write the result back to the radio.
Questions
Do I need to install a USB driver to program the TYT TH-UV3R?
No. WebCHIRP talks to CH340, CP2102, PL2303 or FTDI programming cables from the browser, so there is nothing to install on Windows, macOS or Linux.
Do I need the TYT CPS software?
No. WebCHIRP runs CHIRP's own TYT TH-UV3R driver in the browser, so it reads and writes the same codeplug the desktop software does.
How many channels does the TYT TH-UV3R hold?
128, numbered 1 to 128 in the channel table.